Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

Risk Racing MOTO Fusion 2.0 Grip Tech Bonding System

£14.99
SKU:
RR-GRP-MOTO
Current Stock:
300
Quantity:

Product Description

If you ride a dirt bike then you know what it is like to have a grip that slips. Despite all your best efforts to properly glue and safety wire the grip securely in place, it inevitably slips creating an annoyance and a safety hazard. The act of gluing and wiring grips with specialty tools can be a hassle as well. The wire often breaks leaving a sharp point and wreaks havoc on both your hands and the grip. The gluing process is a mess and difficult to get consistent coverage between your grip and the bar due to the fact that the grip just pushes all the glue to one end or the other.

Risk Racing created a simple and effective solution called Fusion Grip Tech. Fusion Grip Tech is a patent pending bonding system that uses bonding strips and a spray on catalyst. Simply peel and stick the bonding strips to your bars. Then spray the bonding strips with the supplied Fusion Catalyst and easily slip your grip into place. At first the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond. The entire process is clean and simple.

Additionally, Fusion Grip Tech comes packaged with the new Risk Racing Fusion 2.0 Grips. The Fusion 2.0 Grips are a high quality, dual compound soft grip with a reinforced grip end and an ergonomically designed “wave” to the grip flange. This ergonomic “wave” on the flange of the grip reduces pressure points between the riders thumb and the grip flange. Although this patent pending design feature is subtle, it greatly reduces heat and pressure, which reduces blistering and increases rider comfort. Thanks to the Risk Racing Fusion 2.0 Grips you can say goodbye to “Yama-thumb”! If you ride a dirt bike then you know what it is like to have a grip that slips. Despite all your best efforts to properly glue and safety wire the grip securely in place, it inevitably slips creating an annoyance and a safety hazard. The act of gluing and wiring grips with specialty tools can be a hassle as well. The wire often breaks leaving a sharp point and wreaks havoc on both your hands and the grip. The gluing process is a mess and difficult to get consistent coverage between your grip and the bar due to the fact that the grip just pushes all the glue to one end or the other.

Risk Racing created a simple and effective solution called Fusion Grip Tech. Fusion Grip Tech is a patent pending bonding system that uses bonding strips and a spray on catalyst. Simply peel and stick the bonding strips to your bars. Then spray the bonding strips with the supplied Fusion Catalyst and easily slip your grip into place. At first the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond. The entire process is clean and simple.

Additionally, Fusion Grip Tech comes packaged with the new Risk Racing Fusion 2.0 Grips. The Fusion 2.0 Grips are a high quality, dual compound soft grip with a reinforced grip end and an ergonomically designed “wave” to the grip flange. This ergonomic “wave” on the flange of the grip reduces pressure points between the riders thumb and the grip flange. Although this patent pending design feature is subtle, it greatly reduces heat and pressure, which reduces blistering and increases rider comfort. Thanks to the Risk Racing Fusion 2.0 Grips you can say goodbye to “Yama-thumb”! If you ride a dirt bike then you know what it is like to have a grip that slips. Despite all your best efforts to properly glue and safety wire the grip securely in place, it inevitably slips creating an annoyance and a safety hazard. The act of gluing and wiring grips with specialty tools can be a hassle as well. The wire often breaks leaving a sharp point and wreaks havoc on both your hands and the grip. The gluing process is a mess and difficult to get consistent coverage between your grip and the bar due to the fact that the grip just pushes all the glue to one end or the other.

Risk Racing created a simple and effective solution called Fusion Grip Tech. Fusion Grip Tech is a patent pending bonding system that uses bonding strips and a spray on catalyst. Simply peel and stick the bonding strips to your bars. Then spray the bonding strips with the supplied Fusion Catalyst and easily slip your grip into place. At first the catalyst acts as a lubricant for easy grip installation, but after it dries it creates a lasting bond. The entire process is clean and simple.

Additionally, Fusion Grip Tech comes packaged with the new Risk Racing Fusion 2.0 Grips. The Fusion 2.0 Grips are a high quality, dual compound soft grip with a reinforced grip end and an ergonomically designed “wave” to the grip flange. This ergonomic “wave” on the flange of the grip reduces pressure points between the riders thumb and the grip flange. Although this patent pending design feature is subtle, it greatly reduces heat and pressure, which reduces blistering and increases rider comfort. Thanks to the Risk Racing Fusion 2.0 Grips you can say goodbye to “Yama-thumb”!

 

  • The Fusion Bonding system eliminates glue, wires, and slipping
  • The Fusion 2.0 Grips are dual density grips designed to minimize vibration and improve arm pump
  • The ergonomic “wave” on the flange of the grip reduces pressure points between the riders thumb and the grip flange
  • Easy application: clean your handlebar, apply the bonding strips, shake and spray the catalyst to the exposed bonding strips, quickly apply grips, and you're done

Product Videos

Risk Racing Mud Grips (05:04)
Risk Racing is proud to announce their latest innovation—the Mud Grip—a grip cover that allows riders to maintain control of their bike when riding or competing in muddy conditions. The Mud Grip enables riders to keep a tight grasp by making the grips feel dry, even on the nastiest tracks or trails. Every rider has, at one point or another, experienced arm pump from gripping too hard while trying to hold on to wet, muddy, slippery grips during a ride in the rain or on an overwatered track. By slipping the Risk Racing Mud Grip over their regular grips, they can prevent slippage and loss of control, while helping to reduce the chances of arm pump. The brilliance of the Mud Grip lies in the simplicity of Risk Racing's patent pending design. The material compresses to almost zero thickness, so the rider barely notices that the Mud Grip is on. When coated with mud, they disperse the muck and create a tactile surface area that is equivalent to a dry grip. The Mud Grip is designed for use with MX and ATV grips, as well as MTB and BMX grips. They can also be used with bark busters. When using with ATVs, MTBs or bark busters, simply cut off the flanges or ends to allow them to fit properly. Every rider should keep a pair in their gear bag for those unexpected mud rides!
  • Risk Racing Mud Grips
    Risk Racing is proud to announce their latest innovation—the M...

Find Similar Products by Category

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review




Recent Updates

Newsletter


Connect with us Facebook Twitter Instagram

CONTACT US

E: info@riskracingeurope.com
T: 028 9269 9770

RISK RACING EUROPE
Unit 1 Old Station Business Park
100 Church Street
Dromore
Northern Ireland
BT25 1AA

Click the button below to add the Risk Racing MOTO Fusion 2.0 Grip Tech Bonding System to your wish list.